Glyphosate in Well Water: The Public 0.7 mg/L Line

By SubcontractorHub Editorial Team·Published October 2026

Glyphosate in well water reviewed against the public 0.7 mg/L line

Quick Answer

Glyphosate in well water is read against a public MCLG of 0.7 mg/L and an MCL of 0.7 mg/L. The health cell says kidney problems and reproductive difficulties. The source cell says runoff from herbicide use. A single jug from a private well is not, by itself, the public-system rule.

A herbicide panel can list several names that share a runoff sentence. The digit next to glyphosate is not the digit next to atrazine, and it is not safe to borrow because ethylbenzene prints the same 0.7. Dealers who sell treatment still have to say which public line they are reading. SubcontractorHub is software for the customer record. This page is the row. It is not a treatment design, and it is not medical advice.

Ethylbenzene, at the same 0.7 mg/L with a different source cell, already has its own page: ethylbenzene in well water. Atrazine, at 0.003 mg/L, is atrazine in well water. Glyphosate in well water is only this chemical.

The 0.7 Line Is Not Ethylbenzene's 0.7

EPA's national primary table, fetched the day this page was written, lists glyphosate with an MCLG of 0.7 mg/L and an MCL of 0.7 mg/L. The potential-effects cell says kidney problems and reproductive difficulties. The source cell says runoff from herbicide use. Footnote 2 says units are milligrams per liter unless otherwise noted, and that milligrams per liter are equivalent to parts per million. This row did not opt out of that unit.

Ethylbenzene, on that same table, prints 0.7 mg/L in both the goal cell and the MCL cell. Its health cell says liver or kidneys problems. Its source cell says discharge from petroleum refineries. Sharing the digits is not sharing the chemical. Quoting a bare 0.7 without the name lets the next reader pick the refinery row.

Atrazine, on that same table, prints 0.003 mg/L in both cells. Its source cell says runoff from herbicide used on row crops. Sharing the word herbicide is not sharing the digit. The opening sentence of the national page says these standards apply to public water systems. It does not name a single-home well. If the jug on the counter is a private well, say so. Do not write the public MCL as if the well were a public system.

What the Glyphosate in Well Water Note Holds

LineWrite thisDo not write this
ContaminantGlyphosateEthylbenzene, or atrazine
MCLG0.7 mg/LA goal borrowed from a refinery row
MCL0.7 mg/LAtrazine's 0.003 mg/L
Health cellKidney problems; reproductive difficultiesA liver-or-kidneys sentence from ethylbenzene
Source cellRunoff from herbicide useDischarge from petroleum refineries
Unitmg/L, equivalent to parts per million on footnote 2A microgram dropped in without the unit
Who the standards namePublic water systems, on the national pageA single-home well, automatically

The table above is the note. It is not a quote, and it is not a removal design. A customer who wants a price still needs a test, a model, and a scope. Those live on the job. This page only stops the ethylbenzene sentence, or atrazine's 0.003, from landing on a herbicide row that said 0.7.

No Removal Percent Is Printed Here

Footnote 1 says an MCL is set as close to the goal as feasible using the best available treatment technology and taking cost into consideration. That sentence is a definition of how an MCL is set. It is not a percent a cartridge will remove, and it is not a price. The technology table that marks carbon, aeration, or oxidation was not fetched for this row on this date, so this page does not invent an X.

How a mark on that table differs from a treatment technique is what best available technology means. If you sell carbon, say you sell carbon. Do not say a mark you did not fetch is a guarantee on this well. No removal percentage was fetched for this row, so none is printed here. No installed price was fetched, so none is printed. No CAS number was fetched for this row on this date, so none is printed. Write the identifier the lab printed.

What Should the Glyphosate in Well Water Note Say?

Five lines keep the next visit from borrowing ethylbenzene, or from writing a removal claim the table did not print. Name the contaminant the lab printed, show both the goal and the MCL, and say whether the jug is a private well.

  1. The contaminant name as the lab printed it, and not ethylbenzene and not atrazine.
  2. The result and the unit. If the unit is not milligrams per liter, do not drop the unit and call the result 0.7.
  3. The public pair you compared it with: MCLG 0.7 mg/L and MCL 0.7 mg/L, named as the national glyphosate row.
  4. Whether the sample is a private well or a public system. The national page names public water systems. It does not name a single house.
  5. What you did not claim: no removal percent, no installed price, no CAS, and no statement that 0.7 mg/L is ethylbenzene's refinery row.

Where the Row Sits on the Job

The lab sheet belongs with the customer, the address, and the date of the sample. A price for equipment is a later page, after someone has read this row and the rows next to it. Mixing the 0.7 line into a softener quote because the panel listed several herbicides skips the name and skips the fact that ethylbenzene is a different source cell.

The health cell on the fetched table is kidney problems and reproductive difficulties, described as a potential effect of long-term exposure above the MCL. That sentence is the public table's cell. It is not a finding about the household, and it is not a reason to add a medical claim the lab did not print. If a customer asks what the number means for a person, the honest line is that this page is not medical advice.

A mass on a chemical bag is a different conversion. Pounds stated as kilograms, using 0.4535924, stay on pounds to kilograms. That factor is not a glyphosate result, and a glyphosate result is not a bag weight.

How a dealer reads a full panel, including which tests were actually run, is the well water testing guide. The difference between a goal and an enforceable level is MCL and MCLG. Simazine, at 0.004 mg/L, is simazine in well water. The software that holds the customer file is water treatment contractor software. This article does not size a filter and does not tell a household the water is safe to drink.

Frequently Asked Questions

What is the public glyphosate line?

The national primary table prints an MCLG of 0.7 mg/L and an MCL of 0.7 mg/L. The health cell says kidney problems and reproductive difficulties. The source cell says runoff from herbicide use. The unit on an unmarked organic cell is milligrams per liter.

Is 0.7 mg/L the ethylbenzene number?

The digits match ethylbenzene's 0.7 mg/L on the same national table. Ethylbenzene's health cell says liver or kidneys problems, and its source cell says discharge from petroleum refineries. Glyphosate's source cell says runoff from herbicide use. Same digits are not the same chemical.

Does this page print a removal percent?

No. The technology table was not fetched for this row on the day this page was written, so no carbon mark and no oxidation mark is printed here. A mark, when a page does print one, is not a removal percent.

Does this MCL apply to a single-home well?

The national page says these primary standards apply to public water systems. A single-home well is not named in that sentence. A state or county rule can still apply. Read the lab and the local rule.

Is this medical advice?

No. The health cell is the public table's potential-effects cell for long-term exposure above the MCL. It is not a finding about a person in the house.

Save the 0.7 Row With the Sample

The herbicide name, the unit, and whether the jug is a private well belong on the customer record. Book a demo and walk one lab sheet onto that file.

Book a Demo

SubcontractorHub

See How Top Contractors Close More Jobs

AI proposals, sales pipeline, and project management — all in one platform.

  • ✓AI-powered proposals in the field
  • ✓CRM built for contractor sales
  • ✓Project tracking from sale to install
Book a Free Demo →

30 minutes. No commitment.