Free Calculator · By SubcontractorHub Editorial Team · Published November 2026
Concrete Steps Calculator for the Solid Flight, Not the Stringer
A concrete steps calculator on this page turns step count, width, riser, and tread into cubic yards. Three steps, 4 feet wide, with a 7 inch riser and an 11 inch tread, are 0.475 cubic yards. Bags stay blank until you type the bag.
Built by SubcontractorHub — the software contractors use to quote, finance, and run every job.
Book a DemoHow the Concrete Steps Calculator Stacks the Boxes
The bottom step is the tallest box. The top step is one riser.
Three steps, 4 feet wide, a 7 inch riser, and an 11 inch tread are the numbers in the boxes. They are not a code maximum. Bags stay blank until you type a yield.
This concrete steps calculator reads 3 steps as 12.833 cubic feet, which is 0.475 cubic yards. No bag count, because no yield was typed.
All calculations are estimates based on historical information and should be verified by the user.
Important: this is the solid flight
All calculations are estimates based on historical information and should be verified by the user. This tool is provided as a free service for planning purposes only and is not a substitute for a professional assessment, a supplier quote, or applicable local code requirements.
What the Concrete Steps Calculator Is Counting
Picture the flight cut into rectangles that all sit on the same grade. The lowest step is as deep as one tread and as tall as one riser. The next step up is one tread deep and two risers tall, because the concrete under it includes the step below. The top step is one tread deep and as tall as every riser in the flight. Add those boxes and the count of boxes is 1 + 2 + … + n, which is n times (n + 1) divided by 2.
A half-triangle drawn under the slope leaves out the treads that stick past that line. This page does not use that shortcut. It also does not add waste. If the pour needs extra, raise the width or the count before you read the yards, and say so on the order.
Worked flight
Steps 3. Width 4 feet. Riser 7 inches. Tread 11 inches. Stacked boxes 6. The result is 12.833 cubic feet and 0.475 cubic yards. Type cubic feet per bag only if the sack in the truck prints a yield.
| Line | Input | Example |
|---|---|---|
| Steps | whole count | 3 |
| Width | feet | 4 |
| Riser and tread | inches, converted to feet | 7 and 11 |
| Boxes | n(n+1)/2 | 6 |
| Volume | the formula above | 12.833 cu ft / 0.475 cu yd |
| Bags | only if a yield is typed | blank |
How should you order the flight?
- Count the risers you are pouring, not the stringers beside them.
- Measure width in feet across the treads.
- Type the riser and the tread you are forming, in inches.
- Read cubic yards. Divide by 27 is already done.
- Type cubic feet per bag only if you are buying sacks instead of a truck.
- Order the footing and any landing on their own pages. This result does not include them.
What the Concrete Steps Calculator Leaves Out
A public search for this kind of calculator returned ready-mix and contractor estimators that add a platform, a waste percent, or a bag chart. Those extras were not copied. A landing is a separate slab. A frost footing is not a number this page will invent.
Slab and wall volume that is not a flight lives on the concrete calculator. A spread footing is the concrete footing calculator. A round pier is the sonotube calculator. Cubic yards as a unit, without a stair shape, are the cubic yard calculator.
The board that carries a wood stair is the stair stringer calculator. That page is length and layout. This page is yards of concrete. Neither one sets a legal riser. Demand for this URL is from the public result list. Ahrefs was not refreshed, so no volume is stated.
Frequently Asked Questions
How does the concrete steps calculator get cubic yards?
It treats each step as a solid box from that tread down to a level grade. Three steps, 4 feet wide, with a 7 inch riser and an 11 inch tread, are 12.833 cubic feet, or 0.475 cubic yards. The formula is width times riser times tread times n times (n plus 1) divided by 2, then divided by 27.
Does this page include a footing or a landing?
No. The volume is the stepped mass only. A spread footing is the concrete footing calculator. A tube pier is the sonotube calculator. Add a landing only if you measure it as its own slab.
When does the page count bags?
Only after you type cubic feet per bag from the bag you are buying. No yield chart was fetched. No price is printed.
Is this the same tool as a stair stringer?
No. A stringer is a board length and a rise-run layout. This page is the concrete volume of a solid flight. It does not print a code maximum for riser height.
Write the Yards, Then Price the Truck Elsewhere
The flight is geometry. The footing is a different order.
Get a Free DemoAll calculations are estimates based on historical information and should be verified by the user. This tool is provided as a free service for planning purposes only and is not a substitute for a professional assessment, a supplier quote, or applicable local code requirements.