Free Calculator · By SubcontractorHub Editorial Team · Published November 2026

Epoxy Floor Calculator for Gallons, Not a Mil Chart

An epoxy floor calculator on this page multiplies length by width. Twenty feet by twenty feet is 400 square feet. Gallons stay blank until you type the coverage on the can you will buy.

Built by SubcontractorHub — the software contractors use to quote, finance, and run every job.

Book a Demo

How the Epoxy Floor Calculator Uses Coverage

Area, then coats, then the square feet per gallon you type.

Twenty by twenty is the floor in the boxes. It is not a garage. Coverage stays blank until you type the square feet per gallon on the product you will buy.

This epoxy floor calculator reads 400.0 square feet. No gallons, because no coverage was typed.

All calculations are estimates based on historical information and should be verified by the user.

Important: coverage is typed

All calculations are estimates based on historical information and should be verified by the user. This tool is provided as a free service for planning purposes only and is not a substitute for a professional assessment, a supplier quote, or applicable local code requirements.

This Epoxy Floor Calculator Is Not a Slab Volume

A coating is a surface. Concrete is a volume. The concrete calculator turns thickness into cubic yards. This page never asks for thickness. If the floor still needs to be poured, finish that takeoff first. The gallons here are for a coating on an area you already have.

Openings are square feet you type, not a guess for a drain or a post. Leave the box blank and the whole rectangle is coated. Subtract only the area that will not get epoxy. A cove base is not included. If the data sheet prices cove by the foot, measure that foot outside this page.

Worked floor

Length 20 feet. Width 20 feet. Openings blank. The area is 400 square feet. Coats blank means one coat, and that still does not produce gallons. Type the coverage from the data sheet when you want a gallon number. Type a kit size only when the product is sold that way.

LineInputExample
Length × widthfeet20 × 20
Areaopenings blank400 sq ft
Coatsblank means one1
Coveragesq ft per gallon, typedblank
Gallonsarea × coats / coverageblank

How should you read the data sheet?

  1. Measure the rectangle that will be coated, in feet.
  2. Subtract openings that will not get coating, in square feet, before you trust the area.
  3. Type the coverage the manufacturer prints for the product in your hand, not a number from a different solids percentage.
  4. Type the coat count that sheet calls for. Blank stays one coat.
  5. Type the kit size only if you need a kit count. The page rounds kits up.
  6. No price on this page. Porous concrete can take more than the sheet. That extra is your judgment, not a default waste percent.

What the Epoxy Floor Calculator Leaves Out

Flake broadcast, cove base, and a solids-and-mil formula showed up on a public calculator. Those were not fetched as a standard for this page, so they are not defaults. If you want flakes, use the rate on that product's sheet and multiply the floor area yourself.

Tile that is counted by the piece, not by the gallon, is the tile calculator. Mortar for a masonry joint is the mortar calculator. Neither is a floor coating.

A worked check you can do by hand: 400 square feet, two coats, 100 square feet per gallon, is 8 gallons. If the kit is 3 gallons, that is 3 kits because 8 divided by 3 rounds up. Those 100 and 3 are numbers you would type. They are not printed in the boxes. Demand for this URL is from the public result list. Ahrefs was not refreshed.

Frequently Asked Questions

How does the epoxy floor calculator get gallons?

It multiplies the floor area by the number of coats, then divides by the square feet per gallon you type. A 20 by 20 floor is 400 square feet. Gallons stay blank until you type a coverage.

Why is there no default coverage?

No manufacturer yield chart was fetched for this page. Public epoxy calculators ask for the product's own coverage. This one does the same. It does not assume a mil thickness.

Does a blank coat count mean zero?

No. A blank coat box means one coat. Type 2 or 3 if the data sheet you are holding calls for more than one. Kits appear only after you type the gallons in a kit.

Is this a concrete volume calculator?

No. Concrete volume is cubic yards on the concrete calculator. This page is gallons of coating for a floor area, and only after you type coverage. It does not price the kit.

Type the Coverage, Then Count the Gallons

The floor is an area. The can tells you the yield.

Get a Free Demo

All calculations are estimates based on historical information and should be verified by the user. This tool is provided as a free service for planning purposes only and is not a substitute for a professional assessment, a supplier quote, or applicable local code requirements.