Integration · Design tool
Measure Any Roof in Minutes Without Leaving Your Office
EagleView's aerial measurement platform delivers precise roof pitch, area, valley, ridge, hip, and waste factor data derived from aircraft and satellite imagery — and the SubcontractorHub integration populates your roofing proposal automatically when the report is delivered. Roofing contractors who use EagleView eliminate ladder-climb measurement errors, cut proposal prep time by 67%, and win insurance supplement battles with data an adjuster can't dispute.
What Connects Between EagleView and SubcontractorHub
The specific data flows that eliminate double entry and keep both systems current without extra work from your team.
Roof Measurement Data to Proposal
When an EagleView Premium report is delivered, SubcontractorHub pulls the total roof area (squares), pitch for each facet, ridge length, valley length, hip length, eave length, and calculated waste factor directly into the roofing proposal fields. A complete proposal with accurate material quantities is ready within 2 minutes of report delivery, not 45 minutes after a ladder climb and manual takeoff.
Material Quantity Calculation
SubcontractorHub uses the EagleView measurements to automatically calculate shingle quantities (squares + waste), underlayment rolls, ridge cap bundles, and starter strip linear feet based on your configured waste percentages and product specifications. Estimators review calculated quantities rather than computing them by hand, reducing material order errors that cause costly mid-job supply runs.
Report Attachment for Insurance Supplement
The EagleView PDF report is auto-attached to the SubcontractorHub project record and can be included in insurance supplement packages with one click. When an adjuster underestimates square footage by 8%, the EagleView report — produced by aerial imagery, not a contractor's tape measure — is a decisive document for supplement approval. Contractors report 85–90% supplement acceptance rates when submitting EagleView data versus less than 50% with field measurements alone.
Lead Address Order Trigger
When a new roofing lead is created in SubcontractorHub, an EagleView report can be ordered automatically for the property address without any manual ordering in the EagleView portal. Pre-ordering the report before the inspection visit means the estimator arrives with data, not just a clipboard — shifting the first visit from measurement to consultation.
How to Connect EagleView with SubcontractorHub
Connect via EagleView API Credentials
In SubcontractorHub's Integrations tab, enter your EagleView account credentials (username and API key from the EagleView portal) to authorize report ordering and delivery.
Configure Auto-Order Rules
Set whether EagleView reports are ordered automatically when a new roofing lead is created, or on-demand from the lead record — on-demand is recommended for higher-volume markets to control per-report costs.
Map Measurement Fields to Proposal
Align EagleView's measurement outputs (total area, pitch, waste factor) to SubcontractorHub's proposal fields and configure your material calculation formulas including your preferred waste percentage by pitch range.
Set Report Delivery Notifications
Configure who receives a notification when an EagleView report is delivered — typically the assigned estimator — so they can review the measurements and finalize the proposal immediately upon delivery.
Ready to connect EagleView?
Book a 30-minute demo — we'll show you exactly how the integration works and walk you through setup for your account.
Who Uses the EagleView Integration
Insurance Restoration Roofing Company
A roofing company handling 80% insurance work orders EagleView reports on every lead address before the adjuster inspection. When the adjuster's scope underestimates valleys by 120 linear feet and misses 3 squares on a dormered section, the contractor's EagleView supplement package — which auto-populated into the SubcontractorHub supplement workflow — results in an average supplement approval of $2,800 per job, adding $224,000 to annual revenue across 80 supplemented jobs.
Commercial Roofing Bid Without Site Visit
A commercial roofing estimator bids a 40,000 sq ft warehouse roof remotely using EagleView's commercial aerial measurement. SubcontractorHub pulls the square footage, drain locations, and penetration count into the proposal, which the estimator completes in 3 hours without a site visit. The $180,000 bid is delivered same-day — 3 days before the competing contractor who scheduled an on-site measurement visit.
Multi-Property HOA Re-Roofing Bid
An HOA with 48 townhomes needs re-roofing bids. The roofing contractor orders EagleView reports on all 48 addresses simultaneously from SubcontractorHub. Reports arrive overnight; the estimator uses the aggregate total squares to build a per-unit and total-community proposal by 9 AM. Competitors require 2–3 days of on-site measurements; the EagleView-enabled contractor delivers first and wins the $640,000 contract.
Retail Roofing Sales Closing at the Inspection
A retail roofing sales rep orders an EagleView report the night before a scheduled inspection. At the appointment, the rep has a printed proposal with accurate square footage — the homeowner has never seen a contractor arrive with precise measurements before climbing on the roof. The rep closes 58% of these appointments versus the company's prior 31% rate on traditional next-day proposals.
Common Questions About the EagleView Integration
What is the difference between EagleView Premium and Quick Square reports?
EagleView Premium delivers full facet-level detail including individual pitch measurements, all line type lengths, and waste factors — suitable for insurance supplements and precise material ordering. Quick Square delivers total area faster and at lower cost, suitable for quick residential quotes when insurance documentation isn't needed.
How long does it take for an EagleView report to be delivered?
Most EagleView Premium reports are delivered within 2–4 hours during business hours. Rush delivery options (30–60 minutes) are available for an additional fee and can be configured as the default for time-sensitive leads in the SubcontractorHub integration settings.
What is the cost per EagleView report?
EagleView report pricing varies by report type, property complexity, and volume. Residential Premium reports typically range from $15–$25. Volume pricing is available for contractors ordering 50+ reports per month and can be arranged directly through EagleView's sales team.
Is EagleView accurate enough for material ordering without a field measurement?
EagleView's measurement accuracy is within 1–3% of field measurements for standard residential roofs. Most experienced contractors order materials based on EagleView data with a conservative waste factor applied. Complex roofs with multiple dormers or unique geometry occasionally benefit from a field verification check.
Can EagleView measurements be used for solar design?
EagleView offers a separate product (EagleView ASSESS for Solar) that provides roof area and pitch data for solar layout. However, for production modeling and shading analysis, Aurora Solar's LiDAR-based tool is typically more accurate and is the preferred design integration for solar contractors.
Connect EagleView with SubcontractorHub
Your team keeps working in the tools they know. SubcontractorHub ties them together so nothing falls through the cracks.
Book a Free Demo